Futura Basic Cold powder, 500g rosa

---

Description:
Futura Basic Cold cold-curing casting powder made of methyl methacrylate

USE:
for complete dentures
for finishing cobalt-chromium-based casts
for denture repairs and extensions
for underlining

USE:
Mixing ratio:
10 parts powder : 7 parts liquid
A full denture requires approx. 20 g powder and 14 g liquid.

Processing:
The plaster surfaces are isolated with alginate insulator.
Add the appropriate amount of powder to the liquid and mix thoroughly.
FUTURA BASIC COLD with a spatula in a mixing bowl.
The FUTURA BASIC COLD mass can be poured for approx. 2 minutes after mixing. After that, the mass no longer flows between the model and the duplicate and can be modeled.
After a maximum of 5 minutes (at room temperature of 23 0C), place FUTURA BASIC COLD in a polymerization device for polymerization.

Important:
If the room temperature differs from 23 C, higher temperatures shorten, lower temperatures extend the processing time. Do not use expired products!

Polymerization:
The polymerization time in the polymerization device is 15 minutes, at a pressure of 2-5 bar, with a water temperature of 45 C.

PHYSICAL COMPONENTS:
Mixing ratio: 10:7 powder/liquid
Total processing time: 40 minutes
Vickers hardness: 14.2
Flexural strength: 90.5 N/mm2
Elastic modulus: 2684 MPa
Water absorption: 26.8u/mm3
Solubility (in water): 1.6u/mm3

Product description translated by Google!

---

---

If you have any question You can ask here, We reply fast
Or call us: +36(30) 660-9583
You didn't buy anything from us jet. See what others say after their purchase Buyers' book

What do you think of this product?   Write a comment!