Futura Basic Cold liquid,1000 ml

---

Description: Futura Basic Cold cold polymer liquid
For Furuta Basic Cold casting powder

Package: 1000 ml

USABLE WITH CASTING POWDER:
For complete dentures
For finishing cobalt-chromium-based castings
For denture repairs and extensions
For underlays

USABLE:
For complete dentures
For finishing cobalt-chromium-based castings
For denture repairs and extensions
For underlays

USE:
Mixing ratio:
10 parts powder : 7 parts liquid
For a complete prosthesis, approx. 20 g powder and 14 g liquid are required.

Processing:
Insulate the plaster surfaces with alginate insulator.
Add the appropriate amount of powder to the liquid and mix thoroughly.
FUTURA BASIC COLD in a mixing bowl with a spatula.
After mixing, the FUTURA BASIC COLD mass can be poured for approx. 2 minutes. After that, the mass no longer flows out between the model and the duplicate and can be modeled.
After a maximum of 5 minutes (at a room temperature of 23 0C), place the FUTURA BASIC COLD in a polymerization device for polymerization.

Important:
If the room temperature differs from 23 C, higher temperatures shorten, lower temperatures extend the processing time. Do not use expired products!

Polymerization:
The polymerization time in the polymerization device is 15 minutes, at a pressure of 2-5 bar, with a water temperature of 45 C.

PHYSICAL COMPONENTS:
Mixing ratio: 10:7 powder/liquid
Total processing time: 40 minutes
Vickers hardness: 14.2
Flexural strength: 90.5 N/mm2
Elastic modulus: 2684 MPa
Water absorption: 26.8u/mm3
Solubility (in water): 1.6u/mm3

Product description translated by Google!

---

---

If you have any question You can ask here, We reply fast
Or call us: +36(30) 660-9583
You didn't buy anything from us jet. See what others say after their purchase Buyers' book

Similar products:

---

What do you think of this product?   Write a comment!